Fujitsu ETERNUS DX60 S3 - Page 963

Appendix A Parameter List
A.7 Advanced Copy Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
963
● Drive Selection ([Tabular] Tab)
• Checkbox to select drives
● Drive Selection ([Graphic] Tab)
• DE selection list box
• Checkbox to select drives
Description Select the checkbox for the drive to be selected.
When selecting drives, refer to "Requirements for selecting drives" (page 646)
.
Input condition/
Display contents
Checkbox
• Selected
• Cleared
Description Select the DE group.
Options are displayed in the list box when at least one CE or DE in the DE group is
installed in the ETERNUS DX.
Refer to "Options and DE groups for each model" (page 908)
for details.
Input condition/
Display contents
• DE#0x
• DE#1x
• DE#2x
• DE#3x
• DE#4x
• DE#5x
• DE#6x
• DE#7x
• DE#8x
• DE#9x
• DE#Ax
• DE#Bx
Description Select the checkbox for the drive to be selected.
Checkboxes are displayed for unused drives. For 2.5" DEs, drives are displayed from left
to right in ascending order of the slot number. For 3.5" DEs or 3.5" high density DEs,
drives are displayed from bottom left to top right in ascending order of the slot number.
Placing the mouse pointer on the icon displays the detailed information of the drive.
When selecting drives, refer to "Requirements for selecting drives" (page 646)
.
Input condition/
Display contents
Checkbox
• Selected
• Cleared