Fujitsu ETERNUS DX60 S3 - Page 980

Appendix B Factory Default List
B.1 System Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
980
■ Setup Firewall
*1: FST is displayed when using the ETERNUS DX500 S3/DX600 S3 and the ETERNUS DX8700 S3/DX8900 S3.
■ Setup SNMP Agent Basic Interface
■ Setup SNMP Manager
Screen Setting item Default value
Firewall Settings
Acceptable Protocol HTTP
• MNT Selected
• RMT Selected
• FST (*1) Selected
HTTPS
• MNT Selected
• RMT Selected
• FST (*1) Selected
Telnet
• MNT Selected
• RMT Selected
• FST (*1) Selected
SSH
• MNT Selected
• RMT Selected
• FST (*1) Selected
ICMP
• MNT Selected
• RMT Selected
• FST (*1) Selected
Maintenance-Secure
• MNT Selected
• RMT Selected
• FST (*1) Selected
SNMP
• MNT Selected
• RMT Selected
• FST (*1) Selected
RCIL
• MNT Cleared
ETERNUS DX Discovery
• MNT Selected
Screen Setting item Default value
Basic Interface SNMP Function Disable
LAN Port used for SNMP MNT
Authentication Failure Send SNMP Trap
Engine ID Default
MIB-II RFC Version RFC1213
Screen Setting item Default value
Manager IP Version IPv4