Appendix B Factory Default List
B.1 System Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
985
*1: Different times are specified in the factory settings in order to disperse the load on the REMCS center.
*2: The default value when "Split" is selected is "Split large data into multiple E-Mails" and "512KB".
Communication Environment Information
Connection Connection Type Internet Connection
LAN Port used for Remote
Support
MNT
Service Scheduled Connection Time Undefined (10:00 - 15:00) (*1)
Scheduled Connection Period Every Day
Specify the Day of the Week Sunday
Proxy Server Port No. 0
SMTP Server Port No. 25
SMTP over SSL None
SMTP Authentication
Information
Authentication Type No SMTP Authentication
Authentication Method Automatic
Port No. 110
REMCS Center REMCS Center Blank
Detailed Configuration
Information
Data Transmission Method Split (*2)
Specify Storage System Name
for HELO/EHLO Announcement
when Sending E-Mail
Do not specify
Use S/MIME Use
Result notification information
Detailed Settings Administrator Notification
Connection check operator Not Notification
Time Information
Detailed Settings SMTP Connection Timeout 60 sec.
SMTP Response Timeout 60 sec.
SMTP Retry Count 5 count
SMTP Retry Interval 30 sec.
HTTP Timeout 30 sec.
HTTP Retry Count 5 count
HTTP Retry Interval 5 sec.
Queue Time before Sending E-
Mails
(only when POP Before SMTP
authentication is enabled)
1000 msec.
Screen Setting item Default value
To Next Page
Loading...
