Appendix B Factory Default List
B.2 Volume Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
991
■ Set ALUA
■ Set Volume QoS
■ Set Snapshot
*1: For the Snapshot destination SDVs, "Name" + "$snap_N" (N: Number of generations between 1 - 128) is automati-
cally specified.
Parameters Setting Sequential Parallel Multi I/O
Count (SPMC)
• For the ETERNUS DX60 S3
1
• For the ETERNUS DX100 S3
2
• For the ETERNUS DX200 S3
6
• For the ETERNUS DX500 S3
6
• For the ETERNUS DX600 S3
10
• For the ETERNUS DX8700 S3
6
• For the ETERNUS DX8900 S3
10
• For the ETERNUS DX200F
6
Extreme Cache Pool Enable
Screen Setting item Default value
Screen Setting item Default value
ALUA Settings New ALUA Follow Host Response
Screen Setting item Default value
Volume QoS Setting New Bandwidth Limit Unlimited
Screen Setting item Default value
Snapshot Setting Name Selected NAS user volume name (*1)
Number of Generations 7
Schedule
Day of the Week All selected
Time
• When "Time Interval" is selected for "Time"
24
• When "Advanced Setting" is selected for "Time"
All cleared
To Next Page
Loading...
