Fujitsu ETERNUS DX8100 S3 - Page 121

Chapter 3 Component Status
3.6 Controller Enclosure Detail
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
121
- Health
The drive lifetime information is displayed between 0% - 100%. As the lifetime of the drive is reduced,
the health level of the drive is decreased.
A "-" (hyphen) is displayed in the following conditions:
• The drive is neither "SSD" nor "SSD SED"
• The lifetime information cannot be obtained
● For the ETERNUS DX500 S3/DX600 S3 and the ETERNUS AF650
The following items are displayed in the Main area:
- Storage system image
The front view of the CE that is installed in the ETERNUS DX/AF is displayed.
The PFM status and the Battery Backup Unit (BBU) status are indicated by icons. Refer to "A.5
Component Status" (page 410) for details.
By clicking the PFM number, the [PCIe Flash Module Detail] screen is displayed. Refer to "3.9 PCIe Flash
Module Detail" (page 137) for details.
By clicking the BBU number, the [Battery Unit Detail] screen is displayed. Refer to "3.2.10 Battery"
(page 97) for details.
- Parts
The PFM number, the Battery Unit (BTU) number, and the Battery Charger Unit (BCU) number are
displayed.
By clicking the PFM number, the [PCIe Flash Module Detail] screen is displayed. Refer to "3.9 PCIe Flash
Module Detail" (page 137) for details.
By clicking the BTU number, the [Battery Unit Detail] screen is displayed. Refer to "3.2.10 Battery"
(page 97) for details.
By clicking the BCU number, the [Battery Charger Unit Detail] screen is displayed. Refer to "3.2.10
Battery" (page 97) for details.
- Status
The status of each component is displayed. Refer to "A.5 Component Status" (page 410)
for details.
- Status Code
The status code of each component is displayed.
- Error Code
The error code of each component is displayed.