Fujitsu ETERNUS DX8100 S3 - Page 120

Chapter 3 Component Status
3.6 Controller Enclosure Detail
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
120
- Speed
The drive speed is displayed. For SSD or SSD SED, a "-" (hyphen) is displayed.
• 15000 rpm
• 10000 rpm
• 7200 rpm
- Type
The drive type is displayed.
• Online
SAS disks
• Online AF
Advanced Format supported SAS disks
• Nearline
Nearline SAS disks
• Nearline AF
Advanced Format supported Nearline SAS disks
• SSD-M
SSD-Ms (12 Gbit/s) (*1)
• SSD-L
SSD-Ls (12 Gbit/s) (*1)
• SSD
SSDs (6 Gbit/s) (*1)
• Online SED
Online SEDs
• Nearline SED
Nearline SEDs
• SSD-M SED
SSD-M SEDs (*2)
• SSD-L SED
SSD-L SEDs (*2)
*1: The displayed item varies depending on the interface speed (bandwidth) or the capacity of the reserved
space. Unless otherwise specified, this manual refers to "SSD-M", "SSD-L", and "SSD" collectively as "SSD".
*2: In this manual, there may be cases when "SSD SED" is used as a collective term for options and drive types.
- Usage
The usage of the drive is displayed.
• For a drive that is used for user data or an unused drive: Data
• For a drive that is registered as a Global Hot Spare: Global Hot Spare
• For a drive that is registered as a Dedicated Hot Spare: Dedicated Hot Spare
- RAID Group
When the drive belongs to a RAID group, the RAID group number and the RAID group name are
displayed. However, if the drive usage is "Dedicated Hot Spare", the RAID group number and the RAID
group name are displayed even when the drive is not used as a Hot Spare. Click this item to display the
[RAID Group Detail] screen.
When the usage is not "Dedicated Hot Spare" and the drive is not registered in a RAID group, a "-"
(hyphen) is displayed.