Fujitsu ETERNUS DX8100 S3 - Page 124

Chapter 3 Component Status
3.6 Controller Enclosure Detail
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
124
■ Rear View
The image that is displayed in this screen varies depending on the storage system model.
● For the ETERNUS DX60 S3/DX100 S3/DX200 S3, the ETERNUS AF250, and the ETERNUS DX200F
The following items are displayed in the Main area:
- Storage system image
The rear view of the CE that is installed in the ETERNUS DX/AF is displayed.
The CM status and the Power Supply Unit (PSU) status are displayed with icons.
By clicking the CM number, the [Controller Module] screen is displayed. Refer to "3.7 Controller Module
Detail" (page 127) for display items.
By clicking the PSU number, the [Controller Enclosure Power Supply Unit] screen is displayed. Refer to
"3.10 PSU/CPSU (CE) Detail" (page 140)
for display items.
- Parts
The CM number and the PSU number is displayed.
By clicking the CM number, the [Controller Module] screen is displayed. Refer to "3.7 Controller Module
Detail" (page 127) for display items.
By clicking the PSU number, the [Controller Enclosure Power Supply Unit] screen is displayed. Refer to
"3.10 PSU/CPSU (CE) Detail" (page 140)
for display items.
- Status
The status of each component is displayed. Refer to "A.5 Component Status" (page 410)
for details.