Fujitsu ETERNUS DX8100 S3 - Page 179

Chapter 3 Component Status
3.24 Port Detail
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
179
- Current
• Present
The real time current of the SFP in the port is displayed.
- x mA (x: 0.00 to 131.00)
• Warning
- Low or High
The Warning threshold (Low/High) for the current of the SFP in the port is displayed.
• x mA (x: 0.00 to 131.00)
• Alarm
- Low or High
The Alarm threshold (Low/High) for the current of the SFP in the port is displayed.
• x mA (x: 0.00 to 131.00)
- TX Power
• Present
The real time transmission power of the SFP in the port is displayed.
- x mW (x: 0.00 to 6.55)
• Warning
- Low or High
The Warning threshold (Low/High) for the transmission power of the SFP in the port is displayed.
• x mW (x: 0.00 to 6.55)
• Alarm
- Low or High
The Alarm threshold (Low/High) for the transmission power of the SFP in the port is displayed.
• x mW (x: 0.00 to 6.55)
- RX Power
• Present
The real time received power of the SFP in the port is displayed.
- x mW (x: 0.00 to 6.55)
• Warning
- Low or High
The Warning threshold (Low/High) for the received power of the SFP in the port is displayed.
• x mW (x: 0.00 to 6.55)
• Alarm
- Low or High
The Alarm threshold (Low/High) for the received power of the SFP in the port is displayed.
• x mW (x: 0.00 to 6.55)