Fujitsu ETERNUS DX8100 S3 - Page 180

Chapter 3 Component Status
3.24 Port Detail
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
180
● iSCSI port
The detailed iSCSI port information is displayed.
The following items are displayed in the Main area:
■ CE#x CM#y CA#z Port#w Information (for the ETERNUS DX8700 S/DX8900 S3) or
CM#y CA#z Port#w Information (for the other models)
- Location
The location information (x: CE number, y: CM number, z: CA number, w: Port number) of the port is
displayed.
• For the ETERNUS DX8700 S3/DX8900 S3
CE#x CM#y CA#z Port#w
• For the other models
CM#y CA#z Port#w
- Port Mode
The port mode is displayed.
• CA
• RA
• CA/RA
- Status
The port status is displayed. Refer to "A.5 Component Status" (page 410)
for details.
- Status Code
The port status code is displayed.
- Error Code
The port error code is displayed.
- Type
The type of the port is displayed.
• 1G iSCSI
• 10G iSCSI
• 10G Base-T iSCSI
- Multiple VLAN
Whether the Multiple VLAN is enabled or disabled for the port is displayed. A "-" (hyphen) is displayed
when the port mode is "RA".