Chapter 5 Connectivity Status
5.1 Connectivity (Basic Information)
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
242
• CA Port
The location information (x: CE number, y: CM number, z: CA number, w: Port number) of the CA port with
the host affinity setting is displayed.
When setting the host affinity with the CA port group specifications, the location information of the CA port
that configures the CA port group is displayed.
- For the ETERNUS DX8700 S3/DX8900 S3
CE#x CM#y CA#z Port#w
- For the other models
CM#y CA#z Port#w
• LUN Group
The names of the LUN groups with host affinity settings are displayed.
When LUNs are directly allocated to the CA port (when LUN mapping is created) by an application other
than ETERNUS Web GUI, a "-" (hyphen) is displayed.
• Host Response
One of the following host responses is displayed.
- Host response that is allocated to the host group
- Host response that is allocated to the host
- If all of the hosts are to be connected ("All" is displayed in the "Host" field), the host response that was
selected when setting the host affinity
• Solaris MPxIO
• HP-UX
• AIX
• AIX VxVM
• VS850/SVC
• BS2000
• Host responses registered in the ETERNUS DX/AF
• Default
• Virtual Volume
When the host affinity is being used by the Virtual Volume function, "Enable" is displayed. When the host
affinity is not used for the Virtual Volume function, "Disable" is displayed.
This item is displayed only when "Enable" is selected for the Virtual Volume function.
Host affinities of which the Virtual Volume function is enabled cannot be modified by using ETERNUS Web
GUI.
To change host affinities, use the ETERNUS SF Storage Cruiser.
To Next Page
Loading...
