Chapter 5 Connectivity Status
5.1 Connectivity (Basic Information)
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
243
Display Examples of Host Affinities
Display examples of host affinities are shown in the following table.
Example
No.
Display contents Description
Host
Group
Host CA Port
Group
CA Port LUN
Group
Host
Response
Example
1
Host_
Group_
xxx
Host_1
Show...
Port_
Group_
xxx
CM#0
CA#0
Port#0
Show...
LUN_
Group_
xxx
Host_
Response1
The host affinity setting has
been configured in
"Host_Group_xxx",
"Port_Group_xxx" and
"LUN_Group_xxx". The server
recognizes the LUN group,
"LUN_Group_xxx", which has
been specified for each member
host (HBA) in "Host_Group_xxx".
In the host field, the name of
the host that configures
"Host_Group_xxx" is displayed.
In the CA port field, the location
information of the CA port that
configures "Port_Group_xxx" is
displayed.
Refer to "Example 6" for display
example when clicking the
[Show...] link in the "Host" field
or the "CA Port" field.
Example
2
All All Port_
Group_
yyy
CM#0
CA#1
Port#1
LUN_
Group_
yyy
Host_
Response2
All servers will be covered.
The server recognizes the
specified LUN group,
"LUN_Group_yyy", from every
member port in
"Port_Group_yyy".
In the CA port field, the location
information of the CA port that
configures "Port_Group_yyy" is
displayed.
Example
3
– Host_z – CM#0
CA#0
Port#0
LUN_
Group_
zzz
Host_
Response3
The host affinity setting of
"Host_z (HBA)" and "LUN
Group_zzz" has been configured
to the device side CA port,
"CM#0 CA#0 Port#0".
Hosts, CA ports, and LUN groups
are allocated without specifying
a host group or CA port group.
Example
4
–All–CM#1
CA#1
Port#1
LUN_
Group_
www
Host_
Response4
The LUN mapping of
"LUN_Group_www" has been
configured to the device side CA
port, "CM#1 CA#1 Port#1".
Hosts, CA ports, and LUN groups
are allocated without specifying
a host group or CA port group.
To Next Page
Loading...
