EasyManua.ls Logo

Fujitsu ETERNUS DX8100 S3 - Page 293

Fujitsu ETERNUS DX8100 S3
423 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 5 Connectivity Status
5.8 NAS
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
293
Oplocks
When using the Opportunistic locking (Oplocks) function to avoid conflicts between files by locking the
files in the shared folder, "Enable" is displayed. When this function is not used, "Disable" is displayed.
A "-" (hyphen) is displayed when the protocol is "NFS".
Writable
When the write permission is specified for the shared folder, "Yes" is displayed. When the write permission
is not specified, "No" is displayed.
Volume No.
The NAS user volume number (decimal) to which the shared folder belongs is displayed.
Volume Name
The NAS user volume name to which the shared folder belongs is displayed.
Volume Total Capacity
The total capacity of the NAS user volume to which the shared folder belongs is displayed between 400.00
GB - 128.00 TB.
Volume Total Free Space
The total free space in the NAS user volume to which the shared folder belongs is displayed between 0.00
MB - 128.00 TB.
Owner
The owner of the shared folder is displayed.
Group
The group of the shared folder is displayed.
SMB Encryption of Data Access
The current SMB encryption setting (enabled or disabled) for the data access is displayed.
When SMB encryption is performed for data while accessing the shared folder, "Enable" is displayed. When
data is not encrypted, "Disable" is displayed.
A "-" (hyphen) is displayed when the protocol is "NFS".
Access Based Enumeration
The current setting (enabled or disabled) for the enumeration based on the access permission is displayed.
When shared folders and directories that cannot be accessed are hidden according to the access control list
(ACL function), "Enable" is displayed. When inaccessible shared folders and directories are not hidden,
"Disable" is displayed.
A "-" (hyphen) is displayed when the protocol is "NFS".
CIFS Allowed Hosts
A list of CIFS Allowed Hosts is displayed.
CIFS Denied Hosts
A list of CIFS Denied Hosts is displayed.
NFS Allowed Hosts
A list of NFS Allowed Hosts is displayed.

Table of Contents

Other manuals for Fujitsu ETERNUS DX8100 S3

Related product manuals