Fujitsu ETERNUS DX8100 S3 - Page 370

Chapter 8 Advanced Copy Status
8.3 Advanced Copy (All Remote Sessions)
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
370
• Status
The copy session status is displayed.
- Active
Operating normally
- Reserve
Session ID reserved
- Suspend
Suspended by an instruction from the host
- Halt
Remote copy disabled due to an error
- Error Suspend
Copy canceled due to an error
- Unknown
A status other than the ones listed above
• Phase
The copy session phase is displayed. If the status is " Reserved", a "-" (hyphen) is displayed.
- Copying
Copying
- Equivalent
Maintaining equivalent status of the copy source and copy destination that are duplicated after copy is
complete
• Error Code
The error code is displayed when an error occurs. If the status is " Reserved", a "-" (hyphen) is displayed.
Refer to "Appendix B Error Code" (page 414)
for details.
• Direction
The copy direction of the applicable session is displayed. If the status is " Reserved", a "-" (hyphen) is
displayed.
- From Local/To Remote
Session from the local storage system (copy source) to the remote storage system (copy destination)
- From Remote/To Local
Session from the remote storage system (copy source) to the local storage system (copy destination)