Appendix C Setting Procedures for Replacing HBAs
C.4 Required Storage System Settings After HBA Replacement (When Host Affinity Settings are Used)
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
419
2 Change the WWN of the HBA that is to be replaced to the WWN of the new HBA.
2-1 Click [Connectivity] in the navigation.
The [Connectivity] screen appears.
2-2 Click [FC/FCoE] in the category.
The [FC/FCoE Host] screen appears.
2-3 Select the checkbox of the WWN for the HBA that is to be replaced (in this example,
"1000000B5D6513FC" is selected).
2-4 Click [Modify FC/FCoE Host] in [Action].
The [Modify FC/FCoE Host] screen appears.
2-5 Change the WWN of the HBA that is to be replaced to the WWN of the new HBA, and click the
[Modify] button.
A confirmation screen appears.
Do not change the "Name".
To Next Page
Loading...
