Fujitsu ETERNUS DX8100 S3 - Page 87

Chapter 3 Component Status
3.2 Controller Enclosure
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
87
■ For the other models
The following items are displayed in the Main area:
• Enclosure
The CE number is displayed. By clicking this item, the [Controller Enclosure Detail] screen is displayed.
Refer to "3.6 Controller Enclosure Detail" (page 117)
for display items.
This item is displayed for the ETERNUS DX8700 S3/DX8900 S3.
• CM
The CM number is displayed. By clicking this item, the [Controller Module] screen is displayed. Refer to "3.7
Controller Module Detail" (page 127) for display items.
• CA
The CA number is displayed. By clicking this item, the [Channel Adapter Detail] screen is displayed. Refer
to "3.8 Channel Adapter Detail" (page 132)
for display items.
• Type
The CA type is displayed.
The display items in this filed vary depending on the storage system model.
- For the ETERNUS DX60 S3
• FC 2port
• 1G-iSCSI 2port
• 10G Base-T iSCSI 2port
• 6G-SAS 2port
- For the ETERNUS DX100 S3/DX200 S3
• FC 2port
• 10G-iSCSI 2port
• 1G-iSCSI 2port
• 10G Base-T iSCSI 2port
• 6G-SAS 2port
• 10G-FCoE 2port
• 10G-NAS 2port
• 1G-NAS 4port