Fujitsu ETERNUS DX8100 S3 - Page 88

Chapter 3 Component Status
3.2 Controller Enclosure
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
88
- For the ETERNUS DX500 S3/DX600 S3
• FC 2port
• FC 4port
• 10G-iSCSI 2port
• 1G-iSCSI 2port
• 1G-iSCSI-RA 2port
• 10G-FCoE 2port
• 10G-NAS 2port
• 1G-NAS 4port
- For the ETERNUS DX8100 S3/DX8700 S3/DX8900 S3
• FC 2port
• FC 4port
• 10G-iSCSI 2port
• 1G-iSCSI 2port
• 1G-iSCSI-RA 2port
• 10G-FCoE 2port
- For the ETERNUS AF250
• FC 2port
• 10G-iSCSI 2port
• 10G Base-T iSCSI 2port
- For the ETERNUS AF650
• FC 2port
• FC 4port
• 10G-iSCSI 2port
- For the ETERNUS DX200F
• FC 2port
• 10G-iSCSI 2port
• Status
The CA status is displayed. Refer to "A.5 Component Status" (page 410)
for details.
Note that a 1-port type CA for the ETERNUS DX60 S3/DX100 S3 is displayed as "2port" (for FC, "FC 2port"
is displayed). Similarly, a 2-port type CA (1G-NAS) is displayed as "1G-NAS 4port". Available ports can
be checked in the [Internal Parts] tab of the [Channel Adapter Detail] screen. The [Add Channel
Adapter Port] function is displayed in the action field only when a 1-port type CA or a 2-port type CA is
installed in the ETERNUS DX. Refer to "3.8 Channel Adapter Detail" (page 132)
for details. Note that 1-
port type CAs and 2-port type CAs are not available in some regions.