Scanner Settings
● When you use the [Scan/Pause] button
No particular setting is required.
→ The specified application starts when the [Scan/Pause] button is pressed.
● [Send to] button
In the [Main Menu] of the operator panel, change the setting number for the [Send to] button which is
displayed on the LCD.
Match the number with the scanner button event configured in the computer ([Send to 01] to [Send to 50]).
For instance, display "F02" in the LCD's indicator to execute an event configured for [Send to 02].
→ The specified application starts when the [Send to] button is pressed.
HINT
● For more details about the operator panel, refer to How to Use the Operator Panel (page 72).
● For information on how to change the setting number for [Send to] button, refer to How to Use Function
Selection (page 96).
Various Ways to Scan
110
To Next Page
Loading...
