About the Indicators
(1) Information
appears when a message for replacing consumables/cleaning/replacing maintenance parts/regular
maintenance is displayed. For instructions on when
appears, refer to How to Use the Main Menu (page
80).
(2) Prioritize Panel Settings
appears when the operator panel settings are prioritized. For information on how to prioritize the
operator panel settings, refer to How to Use the Main Menu (page 80).
(3) MF Quick Change Setting
Displays whether or not to detect multifeed as follows:
Icon Detection method
Normal Doc Counting Mode
Enable (Detect)
Enable (Ignore)
The icon switches when the [Eject] button is pressed.
Normally, one of the above icons for "Normal" appears when [Enable(Detect)] or [Enable(Ignore)] is
specified.
For information on how to configure the MF Quick Change setting, refer to How to Use the Main Menu
(page 80).
In Doc Counting mode, one of the above icons for "Doc Counting Mode" appears regardless of the MF Quick
Change setting.
How to Use the Operator Panel
78
To Next Page
Loading...
