Display Description
Indicates that a device error occurred during
initialization or scanning.
Error codes beginning with the letter "E", "F", "C", "H",
"A" or "L" are displayed.
For details about errors, refer to Errors (page 156).
When this indication of a device error is displayed,
turn the power off then back on from the main power
switch.
If the indication continues to appear after turning the
power back on, contact your FUJITSU scanner dealer or
an authorized FUJITSU scanner service provider. Refer
to the contact information in the Contact List or the
Contact for Inquiries section in Safety Precautions
bundled with this product and make an inquiry.
If the scanner is not operated for the length of time
that is set for the sleep interval, it enters power
saving mode.
Press any button on the operator panel to return to
the previous screen.
How to Use the Operator Panel
77
To Next Page
Loading...
