Documents for Scanning
Paper Size
The paper size that can be scanned is specified as follows.
A: 52 to 304.8 mm (2.1 to 12.0 in.)
B: 74 to 431.8 mm (2.9 to 17.0 in.) (*1) (*2)
*1:Long Page Scanning supports scanning of documents with a length up to 5588 mm (220 in.) in the feeding
direction.
Note that the resolution must be set to the following dpi value depending on the document size.
● A length that exceeds Double Letter (432 mm) but does not exceed 863 mm
400 dpi or less
● A length that exceeds 863 mm but does not exceed 3150 mm
300 dpi or less
● A length that exceeds 3150 mm but does not exceed 5588 mm
200 dpi or less
● Multi image with a length that does not exceed Double Letter (432 mm)
400 dpi or less
*2:For Manual Feed mode (Single Feed mode), scanning up to A2/A1 size is possible.
You can scan a document folded in half and merge both sides of the image.
HINT
You can set the control for ejecting documents when scanning documents with a document length of 138
mm or shorter.
For details, refer to Setting the Control for Ejecting Documents [Stacking Control] (page 250).
Paper Quality
How to Load Documents
58
To Next Page
Loading...
