EasyManua.ls Logo

Fujitsu fi-7900 - Page 59

Fujitsu fi-7900
278 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Paper Type
Recommended paper types for scanning are as follows:
Wood-free paper
Wood-containing paper
When using paper types other than the above, make sure to test with the same type of paper and see if it can
be scanned before you start scanning the actual document.
Paper Weight
Paper weights supported for scanning are as follows:
A5 or larger, A4/Letter or smaller: 20 to 209 g/m
2
(5.4 to 56 lb)
Smaller than A5, larger than A4: 41 to 209 g/m
2
(11 to 56 lb)
Precautions
The following types of documents may not be scanned successfully:
Documents of non-uniform thickness (e.g. envelopes, documents with photographs attached)
Wrinkled or curled documents
Folded or torn documents
Tracing paper
Coated paper
Carbon paper
Photosensitive paper
Perforated documents
Documents that are neither square nor rectangular
Very thin documents
Photographs (photographic paper)
Also, do not scan the following types of documents:
Paper-clipped or stapled documents
Documents on which the ink is still wet
Documents smaller than A8 size
Documents wider than 304.8 mm (12.0 in.)
Documents other than paper such as fabric, metal foil and OHP film.
Important documents such as certificates and cash vouchers which must not be damaged
HINT
When scanning semi-transparent documents, set [Brightness] higher in the scanner driver to avoid bleed-
through.
How to Load Documents
59

Table of Contents

Other manuals for Fujitsu fi-7900

Related product manuals