Detecting Paper Jam outside of Scannable Area [Jam Detection outside of
scannable area when transporting paper]
Specify whether or not to judge the symptom as a paper jam when a document is skewed and passes outside the
supported scanning area.
1 Start up the Software Operation Panel.
Refer to Starting Up the Software Operation Panel (page 193).
2 From the listing on the left, select [Device Setting 2] → [Jam detection outside of scannable area when
transporting paper].
3 Select whether to enable or disable [Jam detection outside of scannable area when transporting paper].
Select [Enable] to judge such cases as paper jams.
Operational Settings
239
To Next Page
Loading...
