Checking the number of sheets scanned
1 Press the power button on the front of the scanner.
[Ready] is displayed on the LCD.
2 Press the [Menu] button.
[Main Menu] is displayed on the LCD.
3 Press the [ ] or [ ] button and select [25: Doc Counting Mode], then press the [Function/Enter]
button to confirm.
[Doc Counting Mode (More documents)] is displayed on the LCD.
4 Load the documents on the hopper and press the [Scan/Pause] button.
100 sheets will be loaded as an example here.
Scanning starts and "100" is displayed for [Count].
ATTENTION
Documents may not be counted correctly if a multifeed occurs during scanning.
You can select whether to enable multifeed detection by pressing the [Eject] button.
For details, refer to About the Indicators (page 78).
How to Use the Operator Panel
85
To Next Page
Loading...
