Specifying the Interval to Feed the Documents [Set the interval for feeding
sheets]
If the bottom of the scanned image is partially missing due to a large skew when scanning in Automatic Page Size
Detection, specify a longer interval to feed the documents.
Specifying a longer interval leaves more time between each document to be scanned.
1 Start up the Software Operation Panel.
Refer to Starting Up the Software Operation Panel (page 193).
2 From the listing on the left, select [Device Setting 2] → [Set the interval for feeding sheets].
3 Specify the paper feeding interval.
You can select from [Short (Default)] to [Long] (in four levels).
ATTENTION
Note that it takes more time for scanning as the paper feeding interval becomes longer.
Operational Settings
233
To Next Page
Loading...
