4 Close the hopper/ADF/top cover.
For information on how to close the hopper, refer to How to Close the Hopper (page 24).
For information on how to close the ADF, refer to How to Close the ADF (page 28).
For information on how to close the top cover, refer to How to Close the Top Cover (page 30).
Be careful not to get your fingers caught when closing the ADF/top cover.
ATTENTION
Confirm that the ADF is closed properly. Otherwise, documents may not be fed into the ADF.
5 Press the [Stop] button.
Cleaning is completed.
6 Reset the cleaning counter.
Use one of the following methods to reset the counter.
● Select [23: Show/Clear Counters] from [Main Menu] on the operator panel, then reset the counter.
For details, refer to Checking and Resetting the Counters (page 83).
● Start up the Software Operation Panel and reset the counter.
For details, refer to Resetting the Sheet Counters (page 218).
Daily Care
136
To Next Page
Loading...
