No. Name Function
6 Hopper extension Pull out to place long documents on the hopper.
7 Hopper A table for loading documents to scan.
8 Paper output Ejects the scanned documents.
9 Top cover A cover for the upper paper path.
Open it to remove jammed documents or clean the inside
of the scanner.
10 Top cover release tab Push up to open the top cover.
11 Operator panel It consists of an LCD, buttons and check LED.
It can be used to operate the scanner or check its status.
For more details about the operator panel, refer to How to
Use the Operator Panel (page 72).
12 Power button Turns the power ON/OFF.
13 ADF release tab Push up to open the ADF.
14 ADF (Automatic Document Feeder) Pulls and feeds the documents loaded on the hopper one
at a time.
Open this to replace consumables or to clean the inside of
the scanner.
● Back
No. Name Function
1 Ventilation port An outlet for ventilating hot air from inside the scanner.
Scanner Overview
16
To Next Page
Loading...
