3 Specify the width of each margin to fill: top, bottom, right, and left.
T: Top = 0 to 7.5 mm
B: Bottom = 0 to 7.5 mm
R: Right = 0 to 7.5 mm
L: Left = 0 to 7.5 mm
(in 0.5 mm increments)
The specified area is filled in the same color as the background.
ATTENTION
● Note that if the target range of the Page Edge Filler is too wide, some characters near the edge may be
cut out.
● Unless Automatic Page Size Detection is specified, the setting of [Page Edge Filler (ADF)] is applied. For
details, refer to Removing Shadows/Streaks that Appear around Edges of Images [Page Edge Filler
(ADF)] (page 225).
HINT
This setting can also be configured in the scanner driver's setup dialog box. Note that priority is given to
the setting with a larger value.
Operational Settings
228
To Next Page
Loading...
