HINT
[Hopper Level] can also be displayed by shortcut key. To display [Hopper Level] by shortcut key, press the [Eject]
button and either the [ ] or [ ] button at the same time when [Ready] is displayed.
Change the hopper level by using the [ ] or [ ] button in [Hopper Level].
Note that the [Hopper Level] screen is not displayed unless the two buttons are pressed simultaneously.
When [Hopper Level] is displayed by shortcut key, the screen returns to [Ready] after a certain period of time.
This period of time can be configured in [18: Operation Panel Timeout] of the operator panel.
Scanner Overview
32
To Next Page
Loading...
