CHAPTER 3
Small Configuration
Installing the LAS2 Shelf
3-71
FLASHWAVE 7500 Release 6.1
Equipment Installation
Fujitsu and Fujitsu Customer Use Only
FNC-7500-0061-200
Issue 1, May 2009
3 Get the flange kit for 19-inch rack mounting. Table 3-7 [p. 3-70] lists the flange kit part
numbers.
4 Identify the left and right shelf flanges. See Figure 3-57 [p. 3-69] and Figure 3-59 [p. 3-71].
Note: At first glance, the two flanges for 19-inch rack mounting appear to be identical, but they are
not. See Figure 3-59 [p. 3-71]. When properly mounted, the rectangular cutout (hole) in the flange
should align with the rectangular cutout (hole) in the shelf. Also, the flange holes should align with
the shelf mounting holes. See Figures 3-60 [p. 3-72] and 3-61 [p. 3-73].
Left Shelf Flange Right Shelf Flange
Figure 3-59: FC9682LAS2 Shelf Mounting Flanges for 19-Inch Rack Mounting
(Front and Side Views)
To Next Page
Loading...