CHAPTER 3
Small Configuration
Installing the LAS2 Shelf
FNC-7500-0061-200
Issue 1, May 2009
FLASHWAVE 7500 Release 6.1
Equipment Installation
3-72
Fujitsu and Fujitsu Customer Use Only
5 Identify the six flange mounting holes on the side of the FC9682LAS2 shelf. See Figure 3-60
[p. 3-72].
6 Using six pan-head Phillips M4 screws (8 mm long) on each side, secure the left and right
shelf flanges to the FC9682LAS2 shelf as shown in Figure 3-57 [p. 3-69].
Figure 3-60: Flange Mounting Holes on Right Side of FC9682LAS2 Shelf
Mounting
Holes
Mounting
Holes
Mounting
Holes
m1718ds_1
To Next Page
Loading...