CHAPTER 4
ETSI Configuration
Installing the ETSI LAM/DCM Shelf (SDL1)
FNC-7500-0061-200
Issue 1, May 2009
FLASHWAVE 7500 Release 6.1
Equipment Installation
4-38
Fujitsu and Fujitsu Customer Use Only
3 Identify the shelf flanges. See Figure 4-20 [p. 4-37] and Figure 4-21 [p. 4-38].
Note: The layout of the clearance holes is identical for the two flanges for ETSI rack mounting.
Figure 4-21: SDL1 Shelf Mounting Flanges (Front View)
Left Shelf Flange Right Shelf Flange
m1718rj_1
To Next Page
Loading...