CHAPTER 4
ETSI Configuration
Installing the ETSI LAM/DCM Shelf (SDL1)
4-39
FLASHWAVE 7500 Release 6.1
Equipment Installation
Fujitsu and Fujitsu Customer Use Only
FNC-7500-0061-200
Issue 1, May 2009
4 Identify the flange mounting holes for ETSI rack installation on the side of the SDL1 shelf.
See Figure 4-22 [p. 4-39].
5 Using four pan-head Phillips M4 screws (8 mm long) on each side, secure the shelf flanges to
the SDL1 shelf as shown in Figure 4-15 [p. 4-32].
Figure 4-22: Flange Mounting Holes on Right Side of SDL1 Shelf (ETSI Rack Installation)
To Next Page
Loading...