CHAPTER 4
ETSI Configuration
Installing Fans, Rack Covers, and End Panels
4-47
FLASHWAVE 7500 Release 6.1
Equipment Installation
Fujitsu and Fujitsu Customer Use Only
FNC-7500-0061-200
Issue 1, May 2009
5 Locate the mounting hole locations for the ETSI middle rack cover. See Figures 4-29
[p. 4-47] through 4-32 [p. 4-49] to review and select the appropriate configuration. Using
the selected figure as a reference, remove and discard the two mounting screws or mark the
mounting hole locations.
Figure 4-29: Middle Cover Mounting Holes (One LAM/DCM Shelf)
r1421_1
Mark mounting locations
(typical both sides).
Hole 1 (reference)
Hole 4
To Next Page
Loading...