CHAPTER 6
Installing/Removing Modules, Filler Panels and Plug-In Units
Installing/Removing Shelf Plug-In Units
FNC-7500-0061-200
Issue 1, May 2009
FLASHWAVE 7500 Release 6.1
Equipment Installation
6-6
Fujitsu and Fujitsu Customer Use Only
4 Carefully slide the plug-in unit into the appropriate shelf slot, ensuring that the latches mesh
properly into the grooves of the shelf. Do not use the latches to force the plug-in unit into the
shelf.
5 Reconnect the labeled fibers.
This procedure is complete.
To Next Page
Loading...