CHAPTER 6
Installing/Removing Modules, Filler Panels and Plug-In Units
Installing/Removing SFP Modules in a Muxponder or Flexponder™ Unit
FNC-7500-0061-200
Issue 1, May 2009
FLASHWAVE 7500 Release 6.1
Equipment Installation
6-14
Fujitsu and Fujitsu Customer Use Only
4 For a Flexponder plug-in unit, lift the hinged door on the front of the plug-in unit to expose
the SFP modules and client fiber connections, if present.
Note: Older versions of the IFMA-BUC1 unit have the hinged door. Newer versions of the IFMA-BUC1
unit do not have a hinged door. The IFMA-BXC1 unit does not have a hinged door.
Drawer Closed Drawer Open
Figure 6-8: Client Connection Drawer on IFMA-GUC1 Muxponder
To Next Page
Loading...