CHAPTER 2
Core Configuration
Installing Cables
FNC-7500-0061-200
Issue 1, May 2009
FLASHWAVE 7500 Release 6.1
Equipment Installation
2-76
Fujitsu and Fujitsu Customer Use Only
2 Connect the other end of the RICC cable to the appropriate Auxiliary Optical shelf backplane
connector indicated in Table 2-10 [p. 2-77].
3 Referring to Tables 2-10 [p. 2-77] through 2-13 [p. 2-80], repeat Steps 1 [p. 2-75] and 2
[p. 2-76] for all the RICC connections between the Main Optical shelf and all the Auxiliary
Optical shelves in the configuration, as well as all the connections between all the Auxiliary
shelves.
This procedure is complete.
To Next Page
Loading...
