About Actions (for Mac OS Users)
253
Without using the Quick Menu
1. From the ScanSnap Manager menu, select [Settings].
⇒
The ScanSnap setup window appears.
2. In the [Application] pop-up menu on the [Application] tab, select [Cardi-
ris].
• On the ScanSnap setup window, it is recommended to select [Auto] or [Best] for [Image
quality] in the [Scanning] tab.
• The profiles can also be set by selecting [Cardiris] from the [Profile] pop-up menu or the
[Profile] menu.
• Finishing the procedure above, you can save desired settings as profiles. The profiles
can be selected in the [Profile] menu from the next time you scan documents.
For details about how to save scanning settings, refer to "Saving Scanning Settings"
(page 206).
To Next Page
Loading...
