98
4.8.4.3 ONVIF User
You can add, delete ONVIF user, and modify their passwords.
Step 1 Select Setting > System > Account > ONVIF User.
The ONVIF User interface is displayed. See Figure 4-97.
Figure 4-97 ONVIF user
Step 2 Click Add User.
The Add User interface is displayed. See Figure 4-98.
Figure 4-98 Add user
Step 3 Configure user parameters. For details, see Table 4-38.
Table 4-38 Description of user parameters (2)
User’s unique identification. You cannot use existed user name.
Enter password and confirm it again.
The password must consist of 8 to 32 non-blank characters and contain at
least two types of characters among upper case, lower case, number, and
special character (excluding ' " ; : &).
The group that users belong to. Each group has different authorities.
Step 4 Click Save.
The newly added user displays in the user name list.
To Next Page
Loading...
Need help?
General