Galaxy Hunter Series User Manual

105
 When you access the camera through internet, the camera verifies the MAC address
according to the router MAC.
This section takes Network Access as an example.
Step 1 Select Setting > System > Safety > Firewall.
The Firewall interface is displayed. See Figure 4-109.
Figure 4-109 Firewall
Step 2 Select Network Access from Rule Type list, and then select the Enable check box.
 Enable PING prohibited and Prevent Semijoin, and click Save. You do not need
to configure parameters.
 Enable Network Access, and configure trust list and banned list.
1) Select the mode: TrustList and BannedList.
2) Click Add IP/MAC.
The Add IP/MAC interface is displayed. See Figure 4-110.
Figure 4-110 Add IP/MAC
Step 3 Configure parameters. For details, see Table 4-40.
Table 4-40 Description of adding IP/MAC parameters
Parameter
Description

Galaxy Hunter Series Specifications

General

Brand	Galaxy
Model	Hunter Series
Category	Network Hardware
Language	English