174
Select the OSD check box, and the numbers of motor vehicles, non-motor
vehicles and people in the detection area are displayed.
Click Reset to recount.
Click Draw Target next to Pixel Counter, and then press and hold the left
mouse button to draw a rectangle, the Pixel Counter then displays its pixel.
Select the Face Enhancement check box to preferably guarantee clear
face with low stream.
Set a range for snapping face image, including face picture and one-inch
picture.
Select the Enable Face Exposure check box to make face clearer by
adjusting lens aperture and shutter.
Set the face target brightness, and it is 50 by default.
Face
Exposure
Detection
Interval
Set the face exposure detection interval to prevent image flickering caused
by constant adjustment of face exposure. It s 5 seconds by default.
Set scene as Distant View or Close View.
Step 6 Set arming periods and alarm linkage actions. For details, see "5.1.1 Alarm Linkage."
Step 7 Click Save.
Verification
Click on the live interface to view the detection results of video structuralization. See
Figure 5-70.
The plate no. and attributes of motor vehicle are displayed at the right side, and pictures of
people and non-motor vehicles and their attributes at the bottom.
Click the picture in the display area, and the detailed information is displayed.
To Next Page
Loading...
Need help?
General