190-02488-01 Rev. B Pilot’s Guide 2-67
Get Started
Logs
Export to SD Card
FEATURE REQUIREMENTS
• SD card
FEATURE LIMITATIONS
• ADS-B traffic data logging available on GNX 375 only
WAAS Diagnostic Log Functions
• Generates log files automatically upon unit power-up
• Overwrites oldest file when the internal log reaches capacity
• Exports to the “log_files” folder on the SD card
ADS-B Log Functions (GNX 375 only)
• Generates log files automatically upon unit power-up
• Overwrites oldest file when the internal log reaches capacity
• Exports to the “log_files” folder on the SD card
ADS-B log files may take several minutes to export.
A logging function stores WAAS diagnostic and ADS-B traffic data
(GNX 375 only) in the unit’s internal memory. This information is
available for export to an SD card for later analysis.
To export a diagnostic log:
1. Insert an SD card.
2. Tap Utilities > Logs.
3. Select WAAS Diagnostic Log or ADS-B Log.
If no log files are present, these keys are not available.
To Next Page
