1-6 Pilot’s Guide 190-02488-01 Rev. B
System at a Glance
SD Card Slot
Do not remove or insert an SD card while in flight. Always verify the system is powered
off before inserting or removing an SD card.
FEATURE REQUIREMENTS
• SD card in the FAT32 format, with memory capacity between
8 GB and 32 GB
The navigator requires an SD card for the following tasks.
INSERT AN SD CARD
When inserting an SD card:
1. Verify unit power is off and the slot is empty.
2. Hold card such that label faces left edge of display screen.
3. Ensure back edge of card is flush with display bezel after insertion.
EJECT AN SD CARD
1. Power off the unit.
2. Release the spring latch by pressing lightly on exposed edge of card.
• Exporting data logs • Saving system configurations
• Capturing screen images • Enabling Flight Stream connectivity
• Upgrading software • Updating databases
To Next Page
Loading...
