6-4 Pilot’s Guide 190-02488-01 Rev. B
Messages
Flight Plan Advisories
ADVISORY CONDITION CORRECTIVE ACTION
Flight plan import
failed.
Unit unable to decode
flight plan contents.
Wireless import of the
requested flight plan not
possible.
Check for proper operation
of all necessary
components. If the problem
persists, contact dealer for
service.
Flight plan import
failed. Catalog is
full.
The flight plan catalog is
full. Wireless import of the
requested flight plan not
possible.
Delete any unnecessary
flight plans from the
catalog.
<#> new imported
flight plan(s)
available for
preview.
Unit receives the specified
number of flight plans via
the import function. They
are available for viewing
on the Preview page.
No action necessary.
Stored flight plan
waypoint is not in
current navigation
database.
Current navigation
database no longer
contains a stored flight
plan waypoint.
Verify all stored cataloged
flight plans and procedures.
Modify stored flight plans
as necessary to include
waypoints that are in the
current navigation
database.
Stored flight plan
waypoint has
changed location.
A waypoint in a stored
flight plan moved by more
than 0.33 arc minutes
from its previous position.
Verify stored cataloged
flight plans and procedures.
Modify stored flight plans
as necessary to include
waypoints that are in the
current navigation
database.
Steep turn. Aircraft
may overshoot
course during turn.
The flight plan contains an
acute course change
ahead. Following the
guidance requires a bank
in excess of normal. If
coupled, the autopilot may
not be able to execute the
steep turn.
Slowing the aircraft may
shallow the turn.
Changes to active
route are disabled.
Unit receives a flight plan
from G3X Touch, but the
External FPL Crossfill
function is off.
Enable the External FPL
Crossfill function.
Home > System > Setup >
External FPL Crossfill.
To Next Page
