Navigation
190-02488-01 Rev. B Pilot’s Guide 3-47
DIRECT TO AN OFF-ROUTE COURSE
You may activate an off-route course using any of the described direct-to methods.
Activating an off-route direct-to course automatically deactivates the current leg of
the active flight plan.
Removing a Direct-to Course
Removing a direct-to course:
• Reactivates the original active flight plan
• Assigns the leg nearest to the aircraft’s position as the active leg
• Resumes waypoint sequencing
If no active flight plan exists, the aircraft continues on its current heading without
any navigation guidance.
Direct To &
Procedure Fixes
Approach guidance is not
available for procedure fixes. An
example would be activating a
direct-to course to a waypoint
between the final approach fix
and missed approach point. Upon
arriving at the waypoint, approach
guidance does not become active.
To cancel the current direct-to course, tap Remove.
To Next Page
