ActionStep
•
Push the flexible bowl out at each rib and snap the Tube holder under the top lip of
the rib (8).
Note:
Do not force the tube holder into place as this may damage the lip.
•
Check that the surface of the Tube holder is level.
4
Gently move the Delivery arm (10) out to the outer stop.5
Place the Tube rack (9) over the Central spindle (11) and pull the spring loaded Drive sleeve
(12) out so the Tube rack comes to rest.
6
ÄKTA pure User Manual 29119969 AB 203
5 Operation
5.8 Fractionation
5.8.2 Prepare Fraction collector F9-R
To Next Page
Loading...
