GE Krautkramer USM 35X - LIGHT (LCD Backlight); SCALE (Configuring the Measurement Line)

5-52 Issue 01, 04/2005 Krautkramer USM 35X
Operation
H Note:
All color schemes are suitable for indoor use. For out-
door use, we recommend the color schemes 3 and 4.
– Select the function SCHEME.
– Use the right-hand rotary knob to choose the required
color scheme.
LIGHT (LCD backlight)
You can choose between a lighting in the economy
mode min. and a brighter lighting max. for the display
lighting. The economy mode is the default setting.
H Note:
The economy mode reduces the current consumption
and consequently increases the operating time in bat-
tery operation.
– Select the function LIGHT.
– Use the right-hand rotary knob to set the required
lighting.
SCALE (Configuring the measurement line)
As an alternative to the measured values, the USM 35X
enables to display a scale in the measurement line. The
scale gives you an overview of the position of echoes.
You have a choice between a dimensionless ten-divi-
sion scale and a scale showing the real position of the
echoes.
The following settings are possible:
• measval Display of measured values
• snd-pth Display of sound path scale
• div. Display of a dimensionless scale
– Select the function SCALE.
– Use the right-hand rotary knob to set the required
display mode.
Configuring the USM 35X for a test application
5-52 Issue 01, 04/2005 Krautkramer USM 35X
Operation
H Note:
All color schemes are suitable for indoor use. For out-
door use, we recommend the color schemes 3 and 4.
– Select the function SCHEME.
– Use the right-hand rotary knob to choose the required
color scheme.
LIGHT (LCD backlight)
You can choose between a lighting in the economy
mode min. and a brighter lighting max. for the display
lighting. The economy mode is the default setting.
H Note:
The economy mode reduces the current consumption
and consequently increases the operating time in bat-
tery operation.
– Select the function LIGHT.
– Use the right-hand rotary knob to set the required
lighting.
SCALE (Configuring the measurement line)
As an alternative to the measured values, the USM 35X
enables to display a scale in the measurement line. The
scale gives you an overview of the position of echoes.
You have a choice between a dimensionless ten-divi-
sion scale and a scale showing the real position of the
echoes.
The following settings are possible:
• measval Display of measured values
• snd-pth Display of sound path scale
• div. Display of a dimensionless scale
– Select the function SCALE.
– Use the right-hand rotary knob to set the required
display mode.
Configuring the USM 35X for a test application