GE Krautkramer USM 35X User Manual

Krautkramer USM 35X Issue 01, 04/2005 5-43
Operation
5.14 Configuring the USM 35X for
a test application
Besides the default settings for the instrument opera-
tion, you have to configure the USM 35X for calibration
and test tasks. You will find the corresponding functions
in the function groups MEAS, MSEL and LCD.
In addition, you have to check the current time and
date, and set them if required, so that they are correctly
stored together with the test results. Please look up the
function groups CFG1 and CFG2 for more functions for
the general instrument setup (please refer to chapter
5.15 General configuration ).
– If required, go to the third operating level.
– Select the function group MEAS.
Configuring the USM 35X for a test application
Krautkramer USM 35X Issue 01, 04/2005 5-43
Operation
5.14 Configuring the USM 35X for
a test application
Besides the default settings for the instrument opera-
tion, you have to configure the USM 35X for calibration
and test tasks. You will find the corresponding functions
in the function groups MEAS, MSEL and LCD.
In addition, you have to check the current time and
date, and set them if required, so that they are correctly
stored together with the test results. Please look up the
function groups CFG1 and CFG2 for more functions for
the general instrument setup (please refer to chapter
5.15 General configuration ).
– If required, go to the third operating level.
– Select the function group MEAS.
Configuring the USM 35X for a test application

GE Krautkramer USM 35X Specifications

General

Brand	GE
Model	Krautkramer USM 35X
Category	Measuring Instruments
Language	English