5-60 Issue 01, 04/2005 Krautkramer USM 35X
Operation
5.17 Status symbols and LEDs
Status symbols can be displayed in the line below the
screen display to inform about certain settings and
conditions of the USM 35X. The LEDs above the dis-
play give you further information.
Status symbols
Symbol Description
* Display memory is enabled (freeze),
display is stored.
! Data transfer active,
(printing or remote control).
B Battery indicator; appears with low battery
charge, batteries must be charged.
F Function TOF is set to flank.
P Function TOF is set to peak.
J Function TOF is set to jflank.
T Function T-CORR is active.
R Reference echo has been recorded (DGS).
A Function ATT-OBJ/ATT-REF (sound
attenuation) is active.
Staus symbols and LEDs
H Note:
If you are using the Data Logger option, you’ll find more
status symbols, see chapter
Option Data Logger.
LEDs
Symbol Description
A Gate alarm.
R Function REJECT is active.
D Function DUAL (pulser-receiver separation)
is active.
H Note:
Error alarms can be triggered unter certain circumstanc-
es. These are caused by intermediate conditions in instru-
ment operation occuring when the instrumet is used, i.e.
when function parameters are changed. Possible alarms
occuring during instrument operation (setting of
functions) are to be ignored.
5-60 Issue 01, 04/2005 Krautkramer USM 35X
Operation
5.17 Status symbols and LEDs
Status symbols can be displayed in the line below the
screen display to inform about certain settings and
conditions of the USM 35X. The LEDs above the dis-
play give you further information.
Status symbols
Symbol Description
* Display memory is enabled (freeze),
display is stored.
! Data transfer active,
(printing or remote control).
B Battery indicator; appears with low battery
charge, batteries must be charged.
F Function TOF is set to flank.
P Function TOF is set to peak.
J Function TOF is set to jflank.
T Function T-CORR is active.
R Reference echo has been recorded (DGS).
A Function ATT-OBJ/ATT-REF (sound
attenuation) is active.
Staus symbols and LEDs
H Note:
If you are using the Data Logger option, you’ll find more
status symbols, see chapter
Option Data Logger.
LEDs
Symbol Description
A Gate alarm.
R Function REJECT is active.
D Function DUAL (pulser-receiver separation)
is active.
H Note:
Error alarms can be triggered unter certain circumstanc-
es. These are caused by intermediate conditions in instru-
ment operation occuring when the instrumet is used, i.e.
when function parameters are changed. Possible alarms
occuring during instrument operation (setting of
functions) are to be ignored.
To Next Page
Loading...
