GE Krautkramer USM 35X - Overview of the Functions

5-2 Issue 01, 04/2005 Krautkramer USM 35X
Operation Overview of the functions
5.1 Overview of the functions
The functions of the USM 35X are combined to form
function groups on three operating levels.
If the instrument has the option Data Logger, there is an
additional fourth operation level.
– Press the key to change between the operating
levels.
– Press the key to select the function group shown
above it.
– Press the key to select the function shown next
to it. The setting of the selected function is carried
out via the right-hand rotary knob.
The gain function is always directly available via the
left-hand rotary knob.
You can carry out important functions (switch on/off,
dB-step, freeze, zoom and report printout) by pressing
the special keys (ref. chapter 4).
You will also find an overview of the function groups
and their functions on the fold-out page.
Each operating level contains five function groups. You
will recognize your currently active operating level by
the number on the separation line between the first and
the second function group.
First operating level
Second operating level
Third operating level
H Note:
If the instrument is equipped with the Data Logger op-
tion, a fourth operating level is added. For this, refer to
the corresponding chapter Option Data Logger.
5-2 Issue 01, 04/2005 Krautkramer USM 35X
Operation Overview of the functions
5.1 Overview of the functions
The functions of the USM 35X are combined to form
function groups on three operating levels.
If the instrument has the option Data Logger, there is an
additional fourth operation level.
– Press the key to change between the operating
levels.
– Press the key to select the function group shown
above it.
– Press the key to select the function shown next
to it. The setting of the selected function is carried
out via the right-hand rotary knob.
The gain function is always directly available via the
left-hand rotary knob.
You can carry out important functions (switch on/off,
dB-step, freeze, zoom and report printout) by pressing
the special keys (ref. chapter 4).
You will also find an overview of the function groups
and their functions on the fold-out page.
Each operating level contains five function groups. You
will recognize your currently active operating level by
the number on the separation line between the first and
the second function group.
First operating level
Second operating level
Third operating level
H Note:
If the instrument is equipped with the Data Logger op-
tion, a fourth operating level is added. For this, refer to
the corresponding chapter Option Data Logger.