GE Krautkramer USM 35X - Deleting All Data Set; Recalling a Stored Data Set

5-36 Issue 01, 04/2005 Krautkramer USM 35X
Operation
Deleting all data set
You can delete all data sets if you no longer need them.
– Select the function DELETE.
H Note:
Double assignment of the function DELETE/DELALL.
Press the corresponding key repeatedly to toggle
between the functions.
Data saving (function group MEM)
– Use the right-hand rotary knob to set it to on. The
measurement line will then prompt: Delete all data
sets?
– Confirm by pressing the corresponding key
one
more time (all other keys would abort the process).
All data sets are now deleted. The function DELETE is
automatically reset to off.
Recalling a stored data set
You can recall a stored data set; your instrument will
then be provided with all the test-relevant technical
features that existed at the moment of the setup. A
frozen display of the stored A-scan appears.
A Attention:
If a saved data set is loaded, the current instrument
setup is lost. If necessary, save the current instrument
setup to a new data set before loading a saved data
set.
– Select the function SET-#.
5-36 Issue 01, 04/2005 Krautkramer USM 35X
Operation
Deleting all data set
You can delete all data sets if you no longer need them.
– Select the function DELETE.
H Note:
Double assignment of the function DELETE/DELALL.
Press the corresponding key repeatedly to toggle
between the functions.
Data saving (function group MEM)
– Use the right-hand rotary knob to set it to on. The
measurement line will then prompt: Delete all data
sets?
– Confirm by pressing the corresponding key
one
more time (all other keys would abort the process).
All data sets are now deleted. The function DELETE is
automatically reset to off.
Recalling a stored data set
You can recall a stored data set; your instrument will
then be provided with all the test-relevant technical
features that existed at the moment of the setup. A
frozen display of the stored A-scan appears.
A Attention:
If a saved data set is loaded, the current instrument
setup is lost. If necessary, save the current instrument
setup to a new data set before loading a saved data
set.
– Select the function SET-#.